Topfloor EX30-OCS, Руководство оператора

Страница: 14 / 17

www.crescentindustrial.co.uk
EX30-OCS
11. TROUBLESHOOTING
1) The machine will not start:
• Check the earth leakage.
• Check the supply voltage.
• Check the cables for damage.
• Contact your supplier.
2) The machine makes a rattling sound.
STOP IMMEDIATELY!!
CHECK THE MACHINE BEFORE CONTINUING WORK!!
• An oscillating rubber is loose: Tighten!
• A rubber has torn: Ensure that it is replaced!
• The eccentric bearing is worn: Ensure that it is replaced!
Proceed as follows:
• Switch the machine off.
• Remove the plug from the power socket.
• Put the handle in the highest position.
• Tip the machine backwards so that the handle rests on the ground and the pad is vertical.
• Pull the pad off the pad holder.
• Place the new pad carefully on the pad holder and push it firmly into position.
• Return the machine to the upright position.
• Put the handle back in the preferred position.
• Insert the machine’s plug in the power socket.
• Switch the machine on and continue working.