Topfloor EX30-OCS, Руководство оператора

Страница: 7 / 17

www.crescentindustrial.co.uk
EX30-OCS
4. INTENDED USE
The EX30-OCS floor treatment machine is designed for:
• Cleaning
• Stripping
• Polishing
• Sanding
• Levelling
• Buffing
small and medium-sized hard and water-resistant floor surfaces using task-specific pads and/or
accessories. The duty cycle is 100% for normal professional use. Machines fitted with an IP54
plug can be used with (scrubbing) water.
Topfloor has – not yet - tested and approved the use of the machine for other purposes. With
respect to other possible uses, contact Topfloor IN ADVANCE to discuss whether the machine
is suitable. When working, the operator stands BEHIND the machine loosely holding the T-handle.
WARNING!
TOPFLOOR disclaims all responsibility in advance for damage caused as a result of
any use other than described above!!
WARNING!
These machines do NOT comply with ATEX requirements and may
NOT be used in an ATEX environment!!
According to information given on the website www.arboportaal.nl the risk of employees
suffering hearing loss starts at exposure to a noise level of 80 dB(A). Under the Working
Conditions Act, the employer must provide hearing protection if the local noise level exceeds
this value. Employees may only work in an environment with a noise level of 83 dB(A) for four
hours without hearing protection, there must not be an unacceptably high risk of hearing loss
and they may not be exposed to high noise levels during the following four hours. Employees
are obliged to wear hearing protection if they are on average exposed to a noise level of
85 dB(A) on a daily basis