Topens MT9012, Руководство пользователя

Страница: 17 / 32

14
and sunlight.
CAUTION: Make sure the cable outlet hole in the Control Box is always down during installation so as to drain
off the water.
Step 3
Insert the cable of the second gate opener and alarm lamp cables into the control box through middle strain
relief. Then repeat step 2.
Step 4
Insert other cables into the control box through rightmost strain relief. Then repeat step 2.
NOTE:
Only motor cables (1.5m length) are provided. Other cables are subject to site installation requirement
and not provided.
Connection of the Power Supply
WARNING: NEVER connect the gate opener to the power outlet before all the installations have
been done.
The live line and the neutral line should be connected to the power input terminals as the below photo. No
matter the polarity. The wire (not provided) size should be at least 0.75mm2 (18AWG) which is intended to
connect the power supply.