Topcon RL-VH4DR/G2, Инструкция по эксплуатации

Страница: 27 / 56

25
Description of RC-40 functions and Error
Sleep mode To set up (or cancel) the rotating laser to the sleep mode, press the sleep mode key
for three seconds or longer. (In Sleep mode, the leveling lamp of the rotating laser will
flash.)
Laser turns off if standby mode continues for two hours.
(This mode cannot be used when the main power of the rotating laser is OFF.)
Transmission lamp This lamp will flash green when the signal is being transmitted.
The lamp will flash red when an internal error has occurred during transmission.
Battery warning lamp
for RC-40 Battery warning for RC-40.
Replace the batteries with new ones.
Speed control The rotation speed of the rotary head can be changed.
Pressing the left key will slow and pressing the right key will accelerate the rotation
speed.
When both the right and left keys are pressed simultaneously, the plumb beam mode
will activate.
Alignment control
Vertical :
Setting line control
Horizontal :
Setting slope
Performs line control during vertical rotation.
(Valid when the x or y axis is being selected with the x/y axis selection key.)
Sets slope to the slope setting direction during horizontal rotation.
(Valid when the x or y axis is being selected with the x/y axis selection key.)
X/Y axis lamp Indicates axis selected during beam sloping operation.