Topcon RL-VH4DR/G2, Инструкция по эксплуатации

Страница: 19 / 56

17
Level Sensor Mode
For long range or outdoor applications, the instrument can be used with an optional electronic level
sensor. The Topcon LS-80G model is recommended. Press the mode switch control key to select
level sensor mode. The beam rotates at 300 rpm in this setting.
Laser Pointing Mode (stop)
This mode stops rotation and allows the laser beam to be pointed by
manually rotating the head. Press the mode switch control key to select
Laser pointing mode. Beam rotation stops in this mode.
Changing rotation speed
(only available in Laser pointing mode)
After selecting Laser pointing mode, press either Speed control key to
change rotation speed. The right key increases the rotation speed. The
left key reduces the rotation speed.
• This mode can also be set with the Remote Controller RC-40.
• Use a level sensor best suited for the model.
RL-VH4DR : LS-80A / 80B / 90
RL-VH4G2 : LS-80G
The laser beam cannot be moved with the Remote
Controller RC-40.
This mode can be used with the Remote Controller RC-40.
Laser pointing