Topcon RL-VH4DR/G2, Инструкция по эксплуатации

Страница: 17 / 56

15
Continuous scan
(Scan line length can be “Drawn” and held for “Hands-free” operation)
Place target in beam path and hold for a moment. The scanning beam will hesitate, then start again.
When the target is now removed the beam will continue to scan automatically.
To change the length of the scanning line, move the target left or right after the initial scan
hesitation and the scanning line length will increase until the target is removed.
To cancel the drawn scan mode:
In the drawn scan mode, release the target from the laser beam path for 2 seconds or longer and
then place the target on the laser beam path once again.
Scanning hesitates
and starts again.
Move the target left or right while
scanning, the scanning line will
lengthen. The “drawn” line will
continue to scan without target for
hands-free scan operation.