09
4. PROCESS/WORKFLOW
4.1 BREWING – MAIN BREW HEAD
Place coffee, tea or oth-
er product to be brewed
into a paper fi lter with-
in the brew basket and
place basket into the
holders below the spray-
head. Place an empty container in place be-
low the basket assuringall applicable brewer
dispense points align with vesselopening(s).
Select desired beverage type from the ‘bev-
erage selection’ screen. If an energy save
screen, a FRESH BREWED COFFEE screen,
or other screen is displayed, simply touch
the screen to return to the ‘beverage selec-
tion’ screen. Selecting beverage type will
take you to a ‘recipe selection’ screen.
On the ‘recipe selection’
screen, select the bever-
age size to be brewed by
pressing the appropriate
icon key. Various pictorial
or descriptive icons will
be displayed with the volume of the brew
below to help distinguish between recipes.
Dependent on the number of active recipes
within a beverage type, there may be more
than one screen of recipes available. Use the
next and previous keys to navigate among
multiple screens if applicable. Press return
to go back to the beverage selection screen
if desired.
After selecting a recipe to brew, the ‘recipe
detail’ screen will display providing more
details for the selected brew.
The ‘recipe detail’ screen
provides summary recipe
information for the cho-
sen brew cycle including
a recipe name/descrip-
tion, brew volume, time
and temperature. Press the brew button to
immediately start the brew cycle. Press re-
turn to return to the main/standby screen if
desired. If unit has been idle for some time,
a tank fi lling screen may display as the tank
is refi lled. A heating screen will display, if the
recipe temperature is set higher than the
current tank temperature, while the brewer
heats. The brew cycle may be canceled at
any point by touching the heating or brew-
ing screen when displayed.
4.2 PROGRAMMING –
MAIN BREW HEAD
To enter programming
mode, press the upper
left corner (indicated
with dashed lines) of
the ‘beverage selection’
screen and hold for 3-4
seconds. A beep will sound if beeper is ena-
bled. Release the touch screen. Many of the
steps outlined below are applicable to pro-
gramming of the side brew arm spray heads.
Applicable sections below are the calibra-
tion and recipe sections. Other settings are
controlled by the main brew head settings.
A
‘User
Password’
screen with keypad will
be displayed. Type in the
4 digit user password
(3650).
The
entered
number will display in
the blank area in the upper right side of the
screen as you type it. Press enter. CLR will
clear entry without exiting the screen.
Pressing cancel will exit the screen.
It is not possible to save the user password.
The following screen
displays if the incorrect
value is entered. Push
the large button on the
display and you will be
returned to the user
password screen to try again. Enter the
correct password.
