21
set error messages. Press Finish to return
to Service Menu. Press the Counters key
to view water usage and number of cycles
information. Service cycles may be reset.
Press Finish to return to Service Menu.
▪
Press Filtration to activate or reset fi lter
tracking. Filter capacity may be selected
from sizes commonly used in the beverage
industry. Press Finish to return to Service
Menu.
▪
Password is non-changeable.
▪
Press fi nish to go back to the Program-
ming/Service menu. Press Finish again to
return to the main/beverage select screen.
BREWER PARAMETERS
▪
This section of the code provides ac-
cess to enable confi guration of the brewer
according to the options installed during
equipment manufacture.
▪
Selections made in this section determine
items available for calibration and for use in
a brew recipe. Note that inaccurate selec-
tions made in this portion of the code can
create the appearance of equipment mal-
function and therefore the password for this
section will not be provided in the instruc-
tions with the equipment.
▪
Enter programming (see ”ENTER PRO-
GRAMMING”).
▪
Select Brewer Parameters and enter pass-
word – (5639).
▪
All choices shown may be changed by re-
peatedly touching the appropriate button
until the correct option is displayed.
1 or 2 brew valves may be selected. Recipes
may then specify using 1 or both valves and
calibration is allowed for both choices.
▪
Hot Bypass may be set as installed or not
installed. Setting as installed allows use of
hot water bypass in recipes and allows cali-
bration of the valve. If turned on without an
actual valve, recipe would be short any pro-
grammed bypass.
▪
Cold Dilution may be set as installed or
not installed. Setting as installed allows use
of cold water bypass in recipes and calibra-
tion of the valve. If turned on without an
actual valve, recipe would be short any pro-
grammed bypass.
▪
Hot dispense valve is for using a hot water
valve to control dispensing pre-measured
volumes of hot water. A push and hold fea-
ture is automatically enabled when this fea-
ture is selected.
▪
The heating circuit may be programmed
for either a solid state device which would
allow pulse heating or for a mechanical relay
which would not but would be a more eco-
nomical choice.
▪
Press fi nish to go back to the Program-
ming/Service menu. Press Finish again to
return to the main/beverage select screen.
