Tone Commander 2260d, Руководство оператора

Страница: 19 / 34

Announcing Calls
To announce a call over an in-house paging system:
a
Press the PAGE button. If you were
connected to a call, the caller is placed in a
hold loop with “PAG” displayed.
a
After the paging system answers, announce
the call.
a
Press the RELEASE button to disconnect
from the page. The caller will remain on hold.
The paged party must dial the console to
retrieve an announced call. When you answer
their call, press the Hold Loop button for the
calling party, then press the CONNECT button
to transfer the call.
Voice Mail
To transfer a call to a voice mail system:
a
Press the VOICE MAIL button.
a
Press the DSS button for the requested voice
mailbox (optional, if you want to connect to a
specific mailbox).
a
Press the CONNECT button to transfer the
call.
2/00
Tone Commander 2260d Attendant’s Guide 15