Tone Commander 2260d, Руководство оператора

Страница: 15 / 34

a
Press the CONNECT button to immediately
transfer the call without talking to the called
party (unscreened transfer).
or
a
Wait for the called party to answer, then ask
them if they will accept the transferred call.
(At this time you can use the SPLIT button to
switch the handset between the calling and
called parties. The party you are connected to
is displayed on the top line, and the party on
hold is displayed on line 2.)
a
If the caller will accept the call, press the
CONNECT button. The calling party will be
connected to the called party.
a
If the caller will not accept the call, press the
CANCEL button to return to the caller.
or
a
Press the RELEASE button to disconnect the
called party and move the calling party (on
hold) to a hold loop.
Call Hold
To place a call on hold:
a
Press the HOLD button.
The call will be placed in the first available
hold loop. The display will show “HLD” and
the time, in 10 second increments, that the
call has been on hold (see page 8).
Calls that are on hold longer than a preset recall time will ring at
the console.
2/00
Tone Commander 2260d Attendant’s Guide 11