Tone Commander 2260d, Руководство оператора

Страница: 12 / 34

Line 4 – Hold Status
Hold loop status is shown on line 4. Displays correspond to hold
loop keys. Held calls can be retrieved by pressing their hold loop
button. More information about a call is displayed if the POLL
button is pressed before the hold loop button. Hold type can be
one of the following:
HLD
– call placed on manual hold
PAG
– call placed on hold during a paging operation.
NXF
– call placed on hold due to an aborted transfer operation.
CBK
– call placed on hold during a callback operation
The time that the call has been on hold, in 10 second increments,
is displayed after the hold type.
In the display below, call #1 has been on hold for 20 seconds, call
#2 for 30 seconds, and call #3 on hold during a paging operation
for 20 seconds.
Call Information
The type of call is shown in the call information field on lines 1-3.
Possible displays include:
Internal Page Recall All from
(call fwd, all calls)
External NXF Recall Busy from (call fwd, busy)
Hold Recall CBK Recall No Ans from
(call fwd,
no answer)
During dialing, call progress is displayed.
Enter#
– dial tone has been received, ready to dial
Call Setup
– dialing completed, waiting for the network
to connect to called party
Ringing
– dialed call is ringing
User Busy
– called line is busy
No Answer
– called line did not answer
Rejected
– remote end rejected the call
Not Avail
– service or feature is not available
Congestion
– network indicates congestion
Waiting for
Response
– the central office has not yet responded;
the call cannot proceed until it does
2/00
TALK External Barney Jones 12:33
HLD 2 HLD 3 PAG 2
8 Tone Commander 2260d Attendant’s Guide