Tone Commander 2260d, Руководство оператора

Страница: 18 / 34

Call Pickup
To pick up a call ringing at a station:
a
Press the PICKUP button.
a
Press the ringing station’s DSS button.
You will be connected to the call.
Automatic Callback
The system can alert the console when a busy station becomes
idle.
To initiate an automatic callback:
a
Dial the busy station.
a
Press the CALLBACK button.
If a call waiting to be transferred is displayed
on line 2, that call will be placed in a hold
loop. The display above the Hold Loop button
will show “CBK”.
When the busy station becomes idle, the con-
sole will ring. Line 3 will show a ring callback
with the party’s identification.
a
Press the ANSWER button. The station will
be dialed.
a
If the callback was set up for a held party,
press CONNECT to transfer the call.
2/00
Note : This feature requires proper configuration of the 2260d ISDN line
in the telco central office to support Directed Call Pickup.
Note : This feature requires proper configuration of the 2260d ISDN line
in the telco central office to support Automatic Callback. This feature is
only supported with Lucent 5ESS Custom ISDN.
14 Tone Commander 2260d Attendant’s Guide