Tone Commander 2260d, Руководство оператора

Страница: 9 / 34

Hold Loop Buttons
After the HOLD button is pressed, the active call is placed in the
first available hold loop. The hold type (Hold, Page, etc.) and the
time the call has been on hold (in 10 second increments) is
shown on the bottom line of the display.
The Hold Loop (numbered) button directly beneath the call’s hold
display will connect the held call to the handset.
Press the POLL button, then any Hold Loop button to display call
information for a held call.
Shift Button
Some stations or autodial numbers are represented by the lower
lights next to the DSS buttons. Dialing is initiated by first pressing
and releasing the SHIFT button, then pressing the DSS button.
The console will automatically switch back to the upper stations
after completing an operation, or you can manually select the
upper stations by pressing the SHIFT button again. The light
above the button will be on when the lower group of stations is
currently selected.
DSS (Direct Station Select) Buttons
DSS buttons originate calls with a single button.
Each button can accommodate two stations. The station
represented by the lower status light is accessed by first pressing
the SHIFT button.
Spare DSS buttons may be used for autodialing (speed dialing)
frequently-dialed numbers.
2/00
Line Status Lights
off – the directory number is idle.
flashing – the directory number is ringing.
on steady – the directory number has an
active call.
Note : For key telephones with multiple lines (directory number call
appearances), the Line Status Light indicates the state of the first line.
The station may be able to accept calls on other lines when busy is
indicated.
Tone Commander 2260d Attendant’s Guide 5