![TomTom Rider 400 Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/tomtom/rider-400/rider-400_user-manual_1126123010.webp)
10
Mounting on a motorcycle
1.
Attach the RAM™ mount kit to your motorcycle.
2. Fix the holder to the mount and connect the wires to your motorcycle's wiring system.
Important
: The red POS (+) contact needs to be connected to the motorcycle's wiring loom at a
point between the ignition and the +12V battery supply. The black NEG (-) wire needs to be
connected to the motorcycle's wiring loom at a point between the ignition and the -(GND) battery
supply. Attach to a 12V point that can be switched off by the ignition such as the light circuit.
When you are attaching the mount kit to your motorcycle, follow these guidelines:
If you are unsure about attaching the mount kit yourself, ask a professional to fit it for you.
If you choose to attach the mount kit yourself, note that the Active Dock has a built-in fuse.
This means that you don’t need to add a fuse between the device and the motorcycle battery.
Make sure that the mount kit does not interfere with any of the controls on the motorcycle.
Always use the correct tools. If you use unsuitable tools, you may damage or break the mount
kit.
Do not overtighten nuts and screws. You may crack parts of the mount kit or damage your
handlebars if you overtighten nuts or screws.
Using your Rider
Содержание Rider 400
Страница 1: ...TomTom Rider User Manual 17 1 ...
Страница 6: ...6 Addendum 146 Copyright notices 153 ...