Toku TNB-08M Скачать руководство пользователя

Страница: 35 / 133

2-8.

REPLACEMENT OF CHISEL

2-8-1

TOP MOUNT BRACKET, SIDE MOUNT BRACKET

IMPORTANT

A license is required to operate a crane. Do not operate the crane without a license.

Press the chisel into the hydraulic breaker

using the excavator.

During this process, make sure the area is

flat and safe.

Using the hammer and the chisel pin

detacher (A), remove the retainer pin

stopper plug (1) and retainer pin stopper

pin (2).

For models TNB-08M, 1M, 2M, 3M and

4M, a spring pin is used and they do not

use a retainer pin stopper plug (1) and

retainer pin stopper pin.

WARNING

When hammering the pin, always wear protective goggles, hard hat, gloves, mask and

safety boots due to the possibility that metal chips will fly off and may enter your eye

causing serious injury.

WARNING

⚫

Assembly and disassembly work should be performed in a flat area.

⚫

A signal must be decided in advance for the work if more than two people are involved.

⚫

Make sure that a crane is used for lifting if the material weight exceeds 25kg.

⚫

When dismantling heavy parts, support the part as it is removed.

⚫

Do not work on materials that are being lifted by one means or another: put them on a worktable.

⚫

When assembling and disassembling the hydraulic breaker, make sure that the breaker is well

balanced.

⚫

Never remain under the chisel, which is being lifted by crane.

Keep away from the chisel, which is being lifted.

Содержание TNB-08M





































































































































Результаты поиска

Содержание TNB-08M

Отзывы:

Похожие инструкции для TNB-08M

Бренды по названию

Популярные бренды

Toku TNB-08M, Руководство пользователя

Результаты поиска

Содержание TNB-08M

Отзывы:

Похожие инструкции для TNB-08M

Бренды по названию

Популярные бренды