Toku TNB-08M Скачать руководство пользователя

Страница: 12 / 133

⚫

Carry out maintenance on a flat and solid ground surface.

⚫

When the operation is carried out by two or more workers, choose the leader and follow

leaders instructions.

⚫

A crane should be used for handling heavy material (over 25 kg)

⚫

When using a crane, make sure that the material is well balanced.

⚫

Do not work on materials that are being lifted. Put them on a worktable.

⚫

When assembling and disassembling the hydraulic breaker, make sure that the breaker is balanced.

⚫

Never remain under material which is being lifted by crane. Keep away from material.

Do not touch the chisel right after operating the hydraulic breaker.

The chisel becomes very hot during operation and you may get burnt.

WARNING

Do not use any other gas except nitrogen gas. If other gases are used, it may explode

and is dangerous.

When filling nitrogen gas, the chisel may suddenly come out. Therefore, keep away from the

chisel when refilling with nitrogen gas.

WARNING

Various parts will be very hot after operation of the engine. Do not change the filter element immediately.

Change the element after the hydraulic oil and various parts have cooled off.

WARNING

Various parts will be very hot after operation of the engine. Do not change the hydraulic oil immediately.

Change the hydraulic oil after the oil and various parts have cooled off.

WARNING

Use a crane when handling heavy materials

When aligning the pin, do not put your finger or hand into the pin hole. The arm or hydraulic

breaker can move and this may lead to loosing your finger or hand.

WARNING

When hammering the pin, always wear protective goggles, hard hat, gloves, mask and safety boots due

to the possibility that metal chips will fly off and may enter your eye causing serious injury.

WARNING

Содержание TNB-08M





































































































































Результаты поиска

Содержание TNB-08M

Отзывы:

Похожие инструкции для TNB-08M

Бренды по названию

Популярные бренды

Toku TNB-08M, Руководство пользователя

Результаты поиска

Содержание TNB-08M

Отзывы:

Похожие инструкции для TNB-08M

Бренды по названию

Популярные бренды