22
6. RADIO OPERATION ( continued)
When AF switching mode is selected, the radio checks the signal strength of AF all the time.
The interval of checking time of each AF depends on the signal strength of the current station, from a few
minutes for strong station to a few seconds for weak station. Every time that new
AF
is stronger than current
station, it switches over to that frequency for a very short time, and the
NEW FREQUENCY
is displayed for 1-2
seconds. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of
normal program.
During FM mode, when AF is on
, SEEK, (SCAN), AUTO-MEMORY
function can only receive and save RDS
program.
7. TA [TRAFFIC ANNOUNCEMENT] BUTTON
When TA mode is on (TA is displayed on LCD), it will begin to seek TA station and TA SEEK will be displayed on
LCD for a while.
When traffic announcement is transmitted:
1). If the unit is in SD, USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its previous mode and volume level
when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic announcement volume is valid
*
When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic program
identification code has been received.
7. AUXILIAIRY OPERATION
AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can connect any matched external audio
device to this socket. Use the volume knob to adjust volume.
