19
5. COMMON OPERATION
1. To turn the unit on/off.
In power off mode, press any button except
RELEASE
button to turn on the unit. In power on mode, long press
the
POWER
button to turn off the unit.
2. To select function mode
Press
MODE
button to change function mode as follows:
-->TUNER -->USB -->CARD -->BT-->AUX.
When there is no media (USB/CARD), that mode will be skipped.
3. To adjust the volume level
:
rotate
VOLUME
knob to adjust volume level during playback.
4. To mute or resume sound:
press
MUTE
to cut the sound, press again to resume sound immediately
during playback. To resume the sound immediately,
you can also turn
VOLUME
knob.
5. To set sound mode and menu
1) Sound settings:
Press
SEL
button shortly and repeatedly to select the following modes:
VOL (volume),
BASS (without preset DSP), TRE (treble)(without preset DSP), BAL(balance) and FAD (fader)
in the
sequence and circulation. In each mode, the waiting time is about 5 seconds, and when the waiting time is over,
it will return to the last display mode. After selecting a sound mode, use volume control to set level of the
selected sound mode.
2) To set menu:
Press
SEL
button and hold for more than 2 seconds to turn on
TA ON/OFF
mode, then press
SEL
button shortly and repeatedly to select following options :
∗
AF ON/OFF
∗
TA SEEK/TA ALARM
∗
PI SOUND/PI MUTE
,
∗
RETUNE L/RETUNE S
∗
MASK DPI/MASK ALL
∗
BEEP ON/BEEP OFF
∗
USER SET
(FLAT/CLASSIC/ROCK/POP)
∗
EUROPE/AMERICA
∗
VOL LAST/VOL DEFA
∗
STEREO/MONO
(in FM mode)
∗
LOUD OFF/LOUD ON
∗
DX/LOCAL
(in FM mode)
∗
CLK ON/CLK
OFF
∗
CLK 12/24
mode.
After selecting the desired mode, rotate the
VOLUME
button to select one setup item of the desired mode.
(1) TA SEEK/TA ALARM:
TA SEEK mode
: when newly tuned station does not receive TP information for 5 seconds, the radio retunes to
next station which has not the same station(PI) as the last station, but has the TP information. When TP
information gets lost at the current station for retune time which is set by
RETUNE SHORT
(60 seconds) or
RETUNE LONG
(90 seconds), the radio start to retune to next same PI station. When same PI station is not
received in 1 cyclic search, the radio retunes to next station with TP information.
TA ALARM mode
: when this mode is selected, any automatic retune mode is not activated. Only double beep
sound (ALARM) is out-put. When newly tuned station does not have TP information for 5 seconds, beeps are
sounded. When TP information gets lost at the current station for retune time which is set by
RETUNE SHORT
(60 seconds) or
RETUNE LONG
(90 seconds), the radio start to retune to next same PI station. When same PI
station is not received in 1 cyclic search, the radio retunes to next station with TP information. When TP
information gets lost at the current station for retune time, the beep sound is out-putted. When newly tuned
station has no RDS signal,
PI SEEK
may be suppressed.
