INSPECTION AND MAINTENANCE
64
10
ENOM01823-0
Oil level checking
If the oil level is low, or too high, the life
of the engine will be shortened signifi-
cantly.
1. Stop the engine and place the out-
board motor in a vertical position.
2. Turn the top cowl hook levers to
unlock, lift and remove the top cowl.
3. After the engine has been shut off 5
minutes, remove the dipstick and
wipe oil off with a clean cloth.
4. Insert the dipstick to the hole com-
pletely.
5. Remove the dipstick. Oil level must be
between the upper limit and lower
limit shown on the dipstick.
6. If the oil level is below the lower limit,
add the oil to between the upper and
lower limit mark on the dipstick.
1.
Filler cap
2.
Dipstick
3.
Filler port
1.
Upper limit 4200 mL (4.4/3.7 US/Imp qt.)
2.
Lower limit 2200 mL (2.3/1.9 US/Imp. qt.)
ENON00024-0
Note
The oil level should be checked when the
engine is cooled.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears con-
taminated.
ENOM00082-A
Engine oil replenishing
ENOW00972-0
z
Do not add or mix different brands of
engine oil or grade with existing oil. In
case engine oil of other brand or grade is
added, drain all oil and ask dealer for
treatment.
z
In case other than engine oil such as gaso-
line is put in the oil chamber, empty the
chamber and ask dealer for treatment.
z
When replenishing engine oil, be careful
not to allow entry of foreign matters such
as dust and water into oil chamber.
Other parts
• Check if the anode is securely installed.
Repair if necessary
• Check the anode for corrosion and deformation.
Replace
Item
Points to Check
Remedy
1
3
2
ENOF02407-0
CAUTION
2
1
ENOF02432-0
