Toa VP-2241, Инструкция по эксплуатации

Страница: 53 / 328

Chapter 3: SYSTEM OPERATION OUTLINE
8. BrOADcAST PrIOrITIES
3-13
[LIFO broadcasts to the same zone]
While rm-3 is making broadcasts to Zones 1 and 2, if General EV1 of the same priority level makes broadcasts
to Zones 2 and 3, rm-3's broadcast to Zone 2 is interrupted, and General EV1 can make broadcasts to both
Zones 2 and 3.
RM-3
General EV 1
Zone 1
Zone 2
Zone 3
RM-3
General EV 1
Zone 1
Zone 2
Zone 3
8.2. FIFO/LIFO Priorities
Set fIfO (first-in-first-out) or lIfO (last-in-first-out) priority when 2 or more sources are identical in priority level.
This setting is possible for both Emergency rm and General categories.
fIfO: Priority is given to the first-enabled source. Other sources of the same priority level must wait until the
first-enabled source finishes its broadcast.
lIfO: Priority is given to the source last enabled. While one source is broadcasting, if another equipment
source makes a broadcast, the current broadcast is interrupted, allowing the broadcast of the latter
source to go through.
[FIFO broadcasts to the same zone]
While rm-3 is making broadcasts to Zones 1 and 2, if General EV1 of the same priority level makes broadcasts
to Zones 2 and 3, General EV1 is allowed to go through to Zone 3 but cannot broadcast to Zone 2 until rm-3
is finished.