Toa VP-2241, Инструкция по эксплуатации

Страница: 137 / 328

Chapter 7: PC SOFTWARE OFFLINE SETTINGS
7. cONfIGurATION SETTING mODE
7-22
4) [900 module]: Select when connecting music output equipment, such as a cD or cassette player.
The screen for name entry and module selection will be displayed.
usable 900 modules: m-01f, m-01m, m-01P, m-01S, m-01T, m-03P, m-51f, m-51S,
m-51T, m-61f, m-61S, m-61T, u-01f, u-01P, u-01r, u-01S,
u-01T, u-03r, u-03S, u-61S, and u-61T
• Enter an identifying sound source name.
• Select the 900 module to be used.
• When using the sound source for BGM broadcast, tick the [Use this sound source for BGM]
checkbox.
Step 7. After completing the settings of Slots 1 – 8, click on the [Apply] button to save the settings and click on
the [OK] button to close the screen.
3) [VX-200XI] (Audio Input module with control input):
Select when connecting the remote microphone with a control input, such as the Pm-660u.
• Enter an identifying sound source name.
• Select the zones to which the selected source will be broadcast.
· Double-clicking on the leftmost blue box of the zone list causes the corresponding zone to be
marked with a tick.
· All zones are marked with a tick if the [Select All] button is pressed.
· The tick marks are deleted from all zones if the [clear All] button is pressed.
• Select the control output to be activated when this sound source is broadcast.
· Double-clicking on the leftmost blue box of the control output list causes the corresponding
output to be marked with a tick.
· All control outputs are marked with a tick if the [Select All] button is pressed.
· The tick marks are deleted from all control outputs if the [clear All] button is pressed.