Toa VP-2241, Инструкция по эксплуатации

Страница: 138 / 328

Chapter 7: PC SOFTWARE OFFLINE SETTINGS
7. cONfIGurATION SETTING mODE
7-23
7.4. Remote Microphone Properties Settings
When the [VX Properties] screen is closed, if there is an input module set to [VX-200Xr], the [rm Properties]
window will open. Here, set the type of remote microphone to be used, the type of broadcast, the number of
expansion units, and a password.
Note
The following message is displayed if the [main unit] tab is clicked in the rm Properties screen: "This rm
function key setting cannot be changed during configuration setting."
click on the [main unit] tab when assigning function to individual keys on the remote control unit.
The types of modules assigned to the VX-2000's slots are displayed on the screen, and icons for the remote
microphone, sound source, and other connected equipment are displayed to the left of the [VX-2000] column.
Step 1. If necessary, enter a name in [rm Name] box.
Step 2. Select either the rm-200Xf or rm-200X remote microphone.
• If RM-200X is selected, designate the [Type] as either [General] or [Emergency].
• If RM-200XF is selected, the [Type] is automatically set to [Emergency].
Step 3. When increasing the number of function keys, select the number of extension units.
Step 4. If necessary, enter a password.
Select [Off] when not using a password, and [ON] when a password is to be set.
Enter a 4-digit password comprised of the numbers 1 – 5 in the [Password] box.
Note
If a password has been set, the remote microphone cannot be operated without the password. for
entering a password, refer to
p. 5-2 .
Step 5. Set the [rm Properties] for any other remote microphones in the same way.
Activate the window by clicking on the title bar, then perform the settings.
Continued on next page