Toa TT-104, Руководство по эксплуатации

Страница: 14 / 18

OPERATION
USING MANUAL SWITCH
Use this switch to activate the output relay regardless of the timer program. Pressing the switch causes the
output relay to connect for five seconds. This is possible for each individual output. Use this switch when
performing a test at time of equipment installation or for other purposes that necessitate the manual relay
activation regardless of the timer program.
The switch does not work during power outage.
The switch works regardless of the front-mounted output AUTO/OFF switch.
USING REAR-MOUNTED CHANNEL ASSIGNMENT
This switch is used to switch over from the B, C or D channel to the A channel. When the B channel switch is
set to ON, the B program output is delivered from the A channel, with the A program output delivered from the A
channel. In this event, no output is delivered from the B channel.
Example 1
Given that each of the output channels is programed
as Example 1, the output is delivered from each
channel as follows.
A
8:30
9:30
10:30
B
9:00
10:00
11:00
C
12:00
If all the switches are set to OFF.
A channel: Output is delivered at 8:30, 9:30 and 10:30.
B channel: Output is delivered at 9:00,10:00 and 11:00.
C channel: Output is delivered at 12:00.
If both the B and C switches are set to ON.
A channel: Output is delivered at 8:30, 9:00, 9:30,10:00,
10:30,11:00, and 12:00.
No output is delivered from both the B and C channels.
1. Rear-mounted CHANNEL ASSIGNMENT switch vs. front-mounted AUTO/OFF switch. The AUTO/OFF
switch is effective for the program registered into each output.
AUTO OFF
If the CHANNEL ASSIGNMENT switch of B
channel is set to ON and the AUTO/OFF switch
of A channel to OFF in Example 1.
A
B
C
D
A channel delivers output at 9:00, 10:00 and 11:00.
B channel delivers no output.
C channel delivers output at 12:00.
Since the A AUTO/OFF switch is set to OFF, the output is not delivered from the A
channel at 8:30, 9:30 and 10:30 as programed.
Since the B channel is switched over to the A channel, the A channel delivers output at
9:00, 10:00 and 11:00, the hours programed into the B channel.
14