7
• Avoid installing the unit on sea or shore, in dusty locations, or in locations exposed to corrosive gas,
herbicides or other sprayed liquid chemicals such as pools, or extraordinary combustible conditions.
• To prevent camera unit fall, connect the supplied safety wire to the case when installing the camera unit to
the case.
• The dome camera is designed solely for suspended installations. The camera or dome must be suspended
vertically with its dome facing downward. Use special care not to suspend it at a tilted angle.
• The unit is not equipped with a power switch. Perform power construction work so that the camera power
can be turned on and off remotely.
• When cleaning the unit, be sure to switch off the power. Wipe with a soft dry cloth. If it gets very dirty, use
the soft cloth slightly moistened in neutral cleanser. Never use thinner, benzene, or chemically processed
towels as the unit's resin or other parts may be deformed or discolored.
• When cleaning the dome cover, wipe lightly with a soft cloth. In this event, the cover could be scratched and
damaged if the dome is covered in dust or sand. When the cover is extremely dirty, it is highly recommended
that the cover be removed and that its outside surface be washed lightly with water. Since alcohol-based
detergents can turn the dome cover whitish, avoid using them, as camera picture quality could be severely
affected.
• When dust has settled on the unit's lens, lightly clean using a commercial camera blower or cleaning paper.
