background image

4

When Installing the Unit

• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent

accidents that could result in personal injury.

• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. The unit or its mounts may be

subject to corrosion, that might cause it to fall or result in other accidents.

• Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be

loosened by excessive vibration, potentially causing the unit to fall, which could result in personal injury.

When the Unit is in Use

• If any of the following irregularities occurs, immediately switch off the power, and inform the shop from where

the unit was purchased. Further using the unit may result in fire or electric shock.
· If you detect smoke or a strange smell coming from the unit.
· If water or any metallic object gets into the unit.
· If the unit falls, or the unit case breaks.
· If the power supply cord is damaged (exposure of the core, disconnection, etc.)
· If nothing is displayed on the screen even when the ambient temperature exceeds 0 °C.

• To prevent a fire or electric shock, never open nor remove the unit case as there are high voltage

components inside the unit. Refer all servicing to qualified service personnel.

• Do not insert nor drop metallic objects or flammable materials in the ventilation slots of the unit's cover, as

this may result in fire or electric shock.

• Do not touch the unit during thunder and lightning, as this may result in electric shock.

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

When Installing the Unit

• To avoid electric shock, be sure to switch off the power before power supply wiring work.

• Leave the installation of the unit to your TOA dealer because the installation requires expert experience and

skills. The unit may fall off if incorrectly installed, resulting in possible personal injury.

When the Unit is in Use

• Do not stand or sit on, nor hang down from the unit as this may cause it to fall down or drop, resulting in

personal injury and/or property damage.

• Switch off the power, and unplug the power supply plug from the AC outlet for safety purposes when

cleaning or leaving the unit unused for 10 days or more. Doing otherwise may cause a fire or electric shock.

• Have the unit checked periodically by the shop from where it was purchased. Failure to do so may result in

corrosion or damage to the unit or its mounting bracket that could cause the unit to fall, possibly causing
personal injury.

• Contact your TOA dealer as to the cleaning. If dust is allowed to accumulate in the unit over a long period of

time, a fire or damage to the unit may result.

Содержание C-CC704 CU





















Отзывы: