13
8. INSTALLATION
8.1. Cable Routing from the Ceiling
Note:
Be sure to switch off the power when installing the camera.
1. Make a hole in the ceiling panel, then pull out the cable through it.
2. Run the cables extending from the ceiling through the cable entry hole on the upper side of the case, then
secure the case to the ceiling.
Use screws with a nominal diameter of 4 mm and a length of over 25 mm.
Notes
• When installing the camera, ensure that ceiling is strong enough to withstand the camera load.
• Mounting screws are not supplied with the unit. Separately prepare the screws that are strong enough to
withstand the camera load depending on the installation conditions.
• The 4 camera mounting points must be waterproofed with silicone sealant.
