manualshive.com logo in svg

TM RACING TM 4 STROKE 2007, Руководство пользователя, Страница: 27 / 80

Поделиться
Скачать
TM RACING TM 4 STROKE 2007 Скачать руководство пользователя страница 27

ENGLISH

ENGLISH

27

INDICATION:

All TM models do not have a radiator cooling fan and the radiator
dimensions have been studied to optimise compactness and weight.
The cooling system is sufficient for touristic or sports use.
If you want to use an additional cooling fan contact a TM authorised
dealer.

- TM MODELS CAN BE RE-STARTED AT ANY TIME BY KICK OR WITH

THE ELECTRIC STARTER. SWITCH THE ENGINE OFF WHEN YOU
INTEND TO KEEP THE MOTORCYCLE AT A STANDSTILL FOR MORE
THAN 2 MINUTES.

- AFTER EVERY FALL, THE MOTORCYCLE MUST BE CONTROLLED IN THE

SAME WAY AS BEFORE  EVERY START-UP .

- A DEFORMED HANDLEBAR MUST ALWAYS BE REPLACED. NEVER

STRAIGHTEN THE HANDLEBAR AS IT COULD LOOSE ITS STRENGTH.

WARNING

- USE OF THE ENGINE AT A HIGH NUMBER OF REVS WHEN IT IS COLD,

NEGATIVELY AFFECTS THE DURATION OF THE ENGINE. BEFORE USING THE
MOTORCYCLE AT FULL WORKING CONDITIONS, IT IS BETTER TO WARM IT
ADEQUATELY BY DRIVING AT AN AVERAGE SPEED. THE ENGINE HAS
REACHED ITS WORKING TEMPERATURE AS SOON AS THE RADIATORS
BECOME HOT.

- NEVER SHIFT DOWN A GEAR WITHOUT HAVING FIRST SLOWED DOWN. THE

ENGINE WOULD BE TAKEN TO AN EXCESSIVE NUMBER OF REVS AND THE
VALVES AND OTHER ENGINE COMPONENTS WOULD BE DAMAGED. THE
REAR WHEEL COULD ALSO LOCK, LEADING TO LOSS OF CONTROL OF THE
VEHICLE.

- IF THERE ARE ABNORMAL VIBRATIONS DURING FUNCTIONING, CHECK THAT

THE SCREW FASTENERS ARE TIGHTENED WELL.

- IF STRANGE NOISES ARE HEARD DURING DRI

VING

, STOP IMMEDIATELY,

SWITCH THE ENGINE OFF AND CONTACT A TM AUTHORISED DEALER.

DANGER

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE

Содержание TM 4 STROKE 2007

















































































Отзывы:

Нет отзывов