172-65720MA-00 (FJ32-X+BD2) 22 Dec 2021
9
Installation Examples: Horizontal Piping
Correct
Incorrect
Nameplate is not facing upwards
Connector Flange is not in the
vertical plane
Note: If the product is installed incorrectly, it may not be possible to obtain the specified
performance. There is also a risk of serious accidents on the outlet (secondary) side. The
examples shown here are only a selection, and are exclusively for explanation purposes.
Installation Examples: Vertical Piping
Correct
Incorrect
Nameplate is not facing upwards.
Note: If the product is installed incorrectly, it may not be possible to obtain the specified
performance. There is also a risk of serious accidents on the outlet (secondary) side. The
examples shown here are only a selection, and are exclusively for explanation purposes.
Note for Screwed Connection:
When products with screwed connections are installed
on horizontal piping, there is a danger that the weight of
the trap unit will cause the connector body to rotate on
the pipe, putting the trap mechanism out of the
horizontal plane. To prevent this, tighten the screws
securely. In cases where the product is affected by
vibrations or by external contact, it is recommended that
the trap unit should be supported to prevent rotation
(sample support shown to the right).
