Titan TTD129COM, Инструкция по безопасности и эксплуатации

Страница: 19 / 24

COMBI DRILL TTD129COM & TTE130COM
re-charged in less than 1 hour. If the battery pack
and ambient temperature are very cold then re-
charging may take 1 to 1-1/2 hours. If the battery
pack is very hot it will not re-charge because the
internal temperature safety cutout will prevent it.
If the battery pack is very hot you must remove
your battery pack from the charger and allow your
battery pack to cool first to ambient temperature
and then recharging can be started. If you charge
a second battery pack immediately after the first
then the charger can be overheated. Always allow
at least 15 minutes rest between battery pack
charging.
5. REASONS FOR DIFFERENT BATTERY
PACK WORKING TIMES.
Charging time issues, as above, and having
not used a battery pack for a prolonged time
will reduce the working life of the battery pack.
This can be corrected after several charge and
discharge operations by charging & working with
your drill. Heavy working conditions such as large
screws into hard wood will use up the battery pack
energy faster than lighter working conditions. Do
not re-charge your battery pack below 0°C and
above 30°C as this will affect performance.
MAINTENANCE
Remove the battery pack from the tool
before carrying out any adjustment,
servicing or maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your
tool, battery pack or charger. Never use water
or chemical cleaners to clean your tool. Wipe
clean with a dry cloth. Always store your tool
in a dry place. Keep the motor ventilation slots
clean. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.