Titan TTD129COM, Инструкция по безопасности и эксплуатации

Страница: 18 / 24

12. DISPOSAL OF AN EXHAUSTED
BATTERY PACK
To preserve natural resources, please
recycle or dispose of the battery pack
properly. This battery pack contains NI-CD
batteries. Consult your local waste authority for
information regarding available recycling and/
or disposal options. Discharge your battery pack
by operating your drill, then remove the battery
pack from the drill housing and cover the battery
pack connections with heavy duty adhesive tape
to prevent short circuit and energy discharge.
Do not attempt to open or remove any of the
components.
PROBlEM SOlUTION
1. WHY DOES THE DRILL NOT TURN ON
WHEN YOU PRESS THE SWITCH?
The forward and reverse switch, which is on top
of the trigger, is positioned in the lock function.
Unlock the forward and reverse switch putting
it into the required rotation position. Push the
trigger and the drill will start to rotate.
2. THE DRILL STOPS BEFORE THE SCREW
IS COMPLETELY TIGHTENED. WHY?
Verify the torque position of the variable clutch,
you can find the variable clutch between the
chuck and the drill body. Position 1 is the lowest
torque (screw driving force) and position 20 is the
highest torque (screw driving force). Position 21
is for drill operation. Regulate the variable clutch
to a higher position to reach the best result.
3. I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
The battery can be inserted into the charger only
in one direction. Turn the battery around until it
can be inserted into the slot, the red LED light
should turn on when the battery is charging.
4. REASONS FOR DIFFERENT CHARGING
TIMES.
Your charge time can be affected by many
reasons, which are not defects in your product. If
the battery pack is only partly discharged it may be