COMBI DRILL
TTD129COM & TTE130COM
AddITIONAl SAFETY INSTRUCTIONS FOR YOUR COMBI
dRIll
FOR DRILL
1.
Remove the battery pack from the drill before carrying out adjustments.
2. Do not expose to rain or water.
3. Do not store the battery pack in temperatures over 40°C.
4. Always charge the battery pack between temperatures 0°C to 30°C. Ideal charging
temperature is 18°C to 24°C.
5. Only use the charger and the battery pack provided no others.
6. Avoid short circuit of the battery pack connections (screws & nails).
7.
Do not incinerate or burn the battery pack, it may explode.
8. Do not charge a damaged battery pack.
9. Replace any damaged supply cords on your charger.
10. Always disconnect the charger power supply before making or breaking the
connections to the battery pack.
11. Your battery pack and charger will be warm during charging, this is normal.
12. When not in use, remove a charged battery pack from the charger.
13. Always remove the battery pack from the charger immediately after re-charging is
completed.
14. Your drill and battery pack will be warm when working, this is normal.
15. Do not dispose of batteries in fire, or with household waste. Return exhausted
batteries to your local collection or recycling point.
16. Always check walls, floors and ceilings for hidden power cables and pipes.
17. Use auxiliary handles supplied with the tool. Loss of control can cause personal
injury.
18. Wear ear protection with cordless drill. Exposure to noise can cause hearing loss.
19. Accessories and metal parts can become very hot.
20. Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring. Contact with a ‘live’ wire will also make
exposed metal parts of the tool ‘live’ and shock the operator.
21. Remove the battery pack from the drill before carrying out adjustments.
FOR CHARGER
1.
Only use the battery charger specifically stated on the base of the battery.
2. Charger is double insulated for additional electrical safety.
3. Charger is for indoor use only.
4. If the charger supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
5 Charger is double insulated
6
Never charge damaged batteries as these can short circuit and over heat.
7
When the charger is in use it MUST be supervised , if there is any evidence of
overheating then IMMEDIATELY disconnect the charger from the power supply.
8
If gas or smoke is emitted from the battery during charging switch off the power
supply , and move to a well vented area to allow the fumes to vent to atmosphere.
Caution is there is leaking liquid from the battery wear protective clothing, glasses
and clothes as this can be acidic.
9
Always disconnect battery charger and remove battery from charger when the
charging is complete.
Содержание TTD129COM
