34
In
more
detail...
EN
TTB892MLT
Care and maintenance
The golden rules for care
WARNING!
Only perform repairs and maintenance work according to
specialist!
General cleaning
> Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
> In particular clean the air vents (3a) after every use with a cloth and brush.
> Remove stubborn dirt with compressed air (max. 3 bar).
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
> Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
Maintenance
Before and after each use, check the product and accessories (or attachments)
for wear and damage. If required, exchange them for new ones as described in
this instruction manual. Observe the technical requirements.
Power cord
UK plug (for UK only)
.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral
Brown – Live
If the supply cord of this power tool is damaged, it must be replaced by a specially
prepared supply cord available through the service organization.
