TTB892MLT
Before you start
Getting
started...
EN
22
Sanding base plate/paper
Sanding paper is available with different grain sizes (grit) and for different material.
The grain size is indicated with a number on the reverse of the sanding paper, the
Grain size
Class
Application
< 80
Coarse
Removal of paint and varnish, preparation of rough
surfaces.
80-120
Medium
For face sanding and planning small irregularities.
>180
Fine
Finishing, cleaning plaster and water stain from wood.
> Only use suitable sanding papers in terms of application and size. Do not use
papers that are bigger than the base plate of the product.
> Replace worn or damaged sanding papers immediately.
>
a satisfactory result.
> Do not use the same sanding paper on different materials, e. g. do not use
sanding paper that has been used for sanding metal to sand wood. Small metal
particles remaining in the sanding paper will lead to scratches.
Attaching
> Open the SDS tool holder (6) by opening the SDS clamping lever (1) fully (
Fig. 1, step 1).
> Slide sanding base plate (7) onto the SDS tool holder (6) and ensure the
> Fix the sanding base plate (7) by closing the SDS clamping lever (1) fully
(Fig. 1, step 3).
> Check if the sanding base plate (7) is reliably clamped and make adjustment if
necessary.
> With the hook-and-loop system,sanding papers are simply pressed on the base
plate. Align and attach the required sanding paper (11) to the base plate (7) and
7
11
6
3.
1.
2.
4.
Fig. 1
