30
In
more
detail...
EN
TTB892MLT
Operation
General operation
> Check the product, its power cord and plug as well as accessories for damage
before each use. Do not use the product if it is damaged or shows wear.
>
> Always hold the product on its gripping surface. Keep the gripping surface dry
to ensure safe support.
> Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
> Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete stop
before putting it down.
> Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
> Always be aware of kickback, ensure stable footing.
> Ensure the workpiece is free of obstacles like nails or screws before operation.
Remove them if required. Where possible, secure smaller workpieces to
prevent them from moving under the product.
> Secure the workpiece properly, e. g. with a clamping device or a vice.
>
cover the air vents (Fig. 15).
Fig. 15
Sanding
WARNING!
Always use wear a dust mask to protect yourself against hazards
