31
In
more
detail...
EN
TTB892MLT
Operation
> Switch the product on before placing it on the workpiece.
> Move the product back and forth with slow even speed.
>
workpiece. Higher pressure will not increase but lower the performance of the
product and leads to uneven results.
> Keep the product moving at all times, do not stop in one position to avoid
grooves.
> Lift the product from the workpiece before switching it off.
Scraping
WARNING!
Switch the product off, let it come to a complete stop and
disconnect it from the power supply if the attachment gets stuck in the
workpiece. Only then free the jammed attachment.
> Switch the product on before placing the scraper (12) on the workpiece.
> Adjust the product to a proper scraping angle according to the material of
workpiece.
>
the workpiece when processing soft
materials, such as wood. Otherwise the
scraper can cut into the workpiece.
> Move the product forward at an even
speed (Fig. 16).
> Only apply as much pressure as
necessary. Higher pressure will not
increase but lower the performance of
the product and leads to uneven results.
> Lift the product from the workpiece before
switching it off.
Fig. 16
Cutting
WARNING!
Only perform plunge cutting into soft materials such as
plasterboard or wood! Never attempt to conduct any plunge cutting
into hard materials such as metal! Use only the appropriate saw blade
for cutting! If you are unsure when cutting, consult with an experienced
person – risk of injury!
