When servicing the shredding means be aware that,
even though the power source is switched off due to
the interlock feature of the guard, the shredding
means can still be moved.
Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.
Never attempt to override the interlocked feature of
the guard.
guarantee!
Do not leave the product working unattended and
keep it in a dry place out of children’s reach.
Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
Do not touch the cutting means before the product is
disconnected from the power supply and the cutting
means have come to a complete stop.
Whilst using the product, ensure the extension cord
does not become trapped under the wheels or feet.
Before using, check the extension cord for signs of
damage and aging. Do not use the product if the cord
is damaged or worn. DO NOT TOUCH THE
EXTENTION CORD BEFORE DISCONNECTING
THE SUPPLY.
Do not use the product if the extension cord is
damaged or worn.
Have your product serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the product is
maintained.
>
>
>
>
>
>
>
>
>
>
Additional safety instructions for units with
bagging attachments
Switch the product off before attaching or removing
the collection box.
>
>
>
>
>
>
>
Additional warnings
Vibration and noise reduction
Carry the product by the handle with the motor off.
Handling the product properly reduces the possibility
of personal injury.
If the product starts to vibrate abnormally, check it
immediately. Excessive vibration can cause injury.
Always ensure the product is fully assembled before
using it. Never attempt to use an incomplete product
or one fitted with an unauthorised modification.
Do not overload the product.
Follow the maintenance and repair instructions for
this product. Never carry out any modifications to the
product. Information about maintenance and repair is
provided in this user manual.
Only use replacement parts and accessories supplied
and recommended by the manufacturer. Using
third-party parts will immediately invalidate the
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and
low-noise operating modes as well as wear personal
protective equipment.
TTB683SHR
by TITAN
TTB683SHR
by TITAN
Safety information
Safety information
08
09
The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than
30 mA.
Recommendation
