Keep your face and body away from the feed intake
opening.
Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge chute,
or near any moving part.
Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the
base of the machine when feeding material into it.
Always stand clear of the discharge zone when
operating this machine.
When feeding material into the machine be extremely
careful that pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
If the cutting mechanism strikes any foreign objects or
if the machine should start making any unusual noise
or vibration, immediately shut off the power source
and allow the machine to stop. Disconnect the
machine from the supply and take the following steps
before restarting and operating the machine:
Do not allow processed material to build up in the
discharge zone; this may prevent proper discharge
and can result in kickback of material through the feed
intake opening.
If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply
before cleaning debris.
Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
NOTE If a debris collector is not used the text of the
example may be deleted.
Keep the power source clean of debris and other
accumulations to prevent damage to the power
source or possible fire.
Do not transport this machine while the power source
is running.
Stop the machine, and remove plug from the socket.
Make sure that all moving parts have come to a
complete stop
Do not tilt the machine while the power source is
running.
>
>
>
>
>
>
>
>
>
inspect for damage;
replace or repair any damaged parts;
check for and tighten any loose parts.
>
>
>
>
>
>
>
whenever you leave the machine,
before clearing blockages or unclogging chute,
before checking, cleaning or working on the
machine.
>
>
>
Maintenance and storage
When the machine is stopped for servicing,
inspection, or storage, or to change an accessory,
shut off the power source, disconnect the machine
from the supply and make sure that all moving parts
are come to a complete stop. Allow the machine to
cool before making any inspections, adjustments,
etc. Maintain the machine with care and keep it
clean.
Store the machine in a dry place out of the reach of
children.
Always allow the machine to cool before storing.
>
>
>
TTB683SHR
by TITAN
TTB683SHR
by TITAN
Safety information
Safety information
07
06
