background image

Recycling and disposal

EC declaration of conformity

Problem

Possible cause

Solution

 

 

4. Unsatisfactory 

    result / shredding 

    material is not cut 

    cleanly

4.1. Cutting plate is not 

       adequately adjusted

4.2. Blades are worn /

       damaged

4.1. Adjust the cutting 

       plate

4.2. Replace with new one

5. Excessive vibration 

    or noise

5.1. Blades are damaged

5.2. Blades are blocked

5.3. Bolts / knobs are 

       loose

5.1. Have the blades 

       replaced by a 

       specialist

5.2. Remove blockage

5.3. Tighten the bolts /

       knobs

The  product  comes  in  a  package  that  protects  it  against  damage  during 

shipping.  Keep  the  package  until  you  are  sure  that  all  parts  have  been 

delivered  and  the  product  is  function  properly.  Recycle  the  package 

afterwards.

Old products are potentially recyclable under WEEE and do not, therefore, 

belong in your household rubbish. You are requested to assist us and our 

contribution to saving resources and protecting the environment by handing in 

this appliance at an equipped collection centre (if there is one available).

Authorised Signatory and technical file holder

Date : 05/30/2016

Signature:  

Name / title: Peter Harries / Quality Manager

Titan Power Tools (UK) Ltd. Trade House, Mead Avenue,BA22 8RT   

we

Titan Power Tools (UK) Ltd

Trade House, Mead Avenue, BA22 8RT

Declare that the product

 Silent Shredder 2500W TTB683SHR

Serial number: from 000001 to 999999

Complies with the essential health and safety requirements of the

following directives:

The Machinery Directive 2006/42/EC

The Low Voltage Directive 2014/35/EU

The EMC Directive 2014/30/EU

The RoHS Directive 2011/65/EU

The Noise Directive 2000/14/EC

The conformity assessment of Directive 2000/14/EC, was done using Annex 

V of the Directive.

Measured sound power level: 90.7 dB(A)

Guaranteed sound power level: 93 dB(A)

Notified body: TÜV Industrie Service GmbH 

Westendstrasse 199 Dß80686 Munich Germany

ID 0036

· EN60335-1:2012+A11:2014

· EN50434:2014

· EN62233:2008

· EN55014-1:2006/A2:2011

· EN55014-2:1997/A2:2008

· EN61000-3-2:2014

· EN61000-3-11:2000

TTB683SHR

 by TITAN

TTB683SHR

 by TITAN

Trouble shooting / Recycling and disposal

EC declaration of conformity

32

Содержание TTB683SHR


















Отзывы: