NOTE:
Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
WARNING!
Only perform repairs and maintenance work according
to these instructions! All further works must be performed by a
qualified specialist!
WARNING!
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer or its
service.
Cleaning
Spare parts
Power Cord
Clean the product with a slightly damp cloth and mild soap. Use a brush for
areas that are hard to reach.
In particular clean the air vents (12) after every use with a cloth and brush.
Remove stubborn dirt with high pressure air (max. 3 bar).
Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
>
>
>
>
>
>
>
UK plug
The fuse in the main plug of your garden power tool should always be
replaced with one of identical rating.
Check the voltage given on your garden power tool matches the supply
voltage.The garden power tool is supplied with a fitted plug, however if you
should need to fit a new plug follows the instruction below.
Important:
The wire in the mains lead are coloured in accordance with the following
code:
Green & yellow – Earth
Blue – Neutral
Brown – Live.
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows. The wire which is coloured green & yellow must be
connected to the terminal which is marked with E or .
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare
parts are available at an authorised dealer or through our customer service.
Cutting blade
L10
Cutting plate
LSG2811-1 Cutting plate
Description
Model no. or Specification
Keep the product clean. Remove debris from it after each use and before
storage.
Regular and proper cleaning will help ensure safe use and prolong the life
of the product.
Inspect the product before each use for worn and damaged parts. Do not
operate it if you find broken and worn parts.
TTB683SHR
by TITAN
TTB683SHR
by TITAN
Care and maintenance
Care and maintenance
28
29
WARNING!
Never connect live or netutral wires to the earth
terminal of the plug. Only fit an approved 13 Amp BS1363/A plug
and the correct rated fuse.
NOTE:
If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be
destroyed to prevent engaging into a socket. If the supply cord is
damaged it must be replaced by a service agent or a similarly quali
ἀed person in order to avoid hazard
Fig. 16
