Titan Pulsite Link, Инструкция по эксплуатации

Страница: 12 / 25

12
© Titan Enterprises Ltd www.flowmeters.co.uk PulsiteLink_Instruction_Manual_0722
4.1.2 Retrieve Settings from Meter
When connected the settings will normally be automatically retrieved from the meter. If this is
not the case, or the user wishes to check the meter saved settings against those shown in the
software, they can be retrieved from the nonvolatile memory of the flow meter by pressing the
looking glass icon.
4.1.3 Test Outputs
This tab enables the user to manually set
outputs on the Pins for testing to the
target device.
Once the required output is selected click
the “Start Test” button and all pins will
give the selected output rate for 23
seconds.
4.1.4 Software Information
This displays the current software version
of the Interface software and the flow meter
connected.