Titan Pulsite Link, Инструкция по эксплуатации

Страница: 15 / 25

15
© Titan Enterprises Ltd www.flowmeters.co.uk PulsiteLink_Instruction_Manual_0722
Analog Response Time: This selects the rate that the
analog output and asynchronous pulse outputs are
updated.
Chose the slowest required for the lowest frequency of input
pulses
expected to be seen. Hovering your mouse over the
Cut Off value will give a recommended lowest flow for the
input calibration k factor and the chosen Analog Response
Time.. Setting the cut-off value below the recommended
level means when the flow is between the set value and the
recommended value, the display will occasionally read
zero.
K Factor Values: Enter the values of flow and pulses per
litre (K factor) as found in the calibration certificate supplied
with your flow meter.
4.3.3 External Connections:
Within this section the user can configure pulse, analog and alarm outputs.