Titan Pulsite Link, Инструкция по эксплуатации

Страница: 23 / 25

23
© Titan Enterprises Ltd www.flowmeters.co.uk PulsiteLink_Instruction_Manual_0722
6 Technical Specification
Power Requirement 15-24Vdc
0.1 amps
Regulated
Input Types Pulse
Reed Switch
max 5kHz
max 400Hz
Pulse Output
(Scalable)
NPN and PNP
Options:
Asynchronous 50:50
Synchronous 50:50
Fixed width
max 2.5kHz
pull up/down resistor
required
24V@20mA max.
Scalable pulse per litre
Analog Output
(Scalable)
4-20mA (Active) 250 Ω maximum
0-5Vdc / 0-10Vdc 14VDC minimum supply
Flow Set Points NPN/PNP FET transistors 20mA@24Vdc max
Sensor Supply 5Vdc 50mA max 20 o C
25mA max 65
o
C
Response Time
(User Configurable)
100ms, 1s or 10s Option in software
Accuracy
4 – 20mA output ±0.012% linearity
±0.15% maximum total output error 16-Bit resolution and
monotonicity
0 – 10 Volt output ±0.1% linearity
±0.5% maximum total output error 16-Bit resolution and
monotonicity
0 – 5 Volt output ±0.1% linearity
±0.5% maximum total output error
16-Bit resolution and
monotonicity
Pulse output
(synchronous)
±1μs instantaneous pulse edge accuracy
All pulses
32-Bit conversion ratio
better than ±300 parts per
trillion
Pulse output
(asynchronous)
±100μs instantaneous pulse edge
accuracy
±0.01% synthesized frequency error
32-Bit conversion ratio
better than ±300 parts per
trillion
Housing IP64 ABS/PC polymer
Connections 1 x USB Type A
9 x 5mm Pitch Terminal connections
2 x PG9 Cable Glands
Internal