4
②
Please replace the ignition pin when the ignition pin cannot ignite the pilot flame
(Replace every two years).
Safety Instructions
1. Unscrew the back cover plate and remove the back cover plate A;
2. Disconnect the ignition pin connecting terminal B, remove the metal clip C, and
remove the old ignition pin D;
3. Replace the new ignition pin D, and then connect the terminal B, insert the new
ignition pin back to the original position, and fix it with metal clip C;
4. Make sure that the pilot flame sensor on the ignition pin does not contact with the
metal sheet around it (the distance is about 2~5mm), and finally assemble the back
cover plate A.
