10
Front View
Side View
CO
2
& O
2
Sensor
AC110V
LP/NG
Diagram of Hoisting Use
NOTE
Do not operate the Ares Garden Heater before you fully understand the functions of the product.
Please read the manual carefully and if you have any questions, please consult with a licensed
professional installer.
WARNING
1. This heater has a built-in safety device (Tip Over switch); if the machine tilts, tips over, or
falls, the heater will automatically shut down. The heater must be horizontal to operate.
2. Verify that you are connecting the proper gas source for your type of heater (LP or NG).
3. Connect the proper gas supply source for your heater (verify that it is the proper pressure
by referring to table parameters) to the input pipe connection of the Ares Garden Heater.
Tighten with a wrench.
4. After the gas supply pipe is connected, use soapy water to check whether there is leakage
at the connection. If there is leakage, you need to tighten it again to ensure no air leakage
occurs.
5. Make sure that the CO
2
/ O
2
sensor of the Atlas Controller is securely connected to the
sensor port and that the sensor is unobstructed.
Integrated
expansion ring
CO
2
& O
2
Sensor
AC110V
Liquid
Propanene
LPG/NG