Titan Attachments 191587, Руководство оператора

Страница: 7 / 50

7
INTRODUCTION
APPLICATION
TITAN Pro Series Rotary cutters are ideal for clearing grass, weeds, and light brush. These cutters
offer fast, clean, dependable mowing, and have been extensively tested to ensure operating
safety. High blade tip speeds assure a clean cut in a variety of field conditions. The standard
stump jumper slides over stumps, rocks, and debris and safety guards keep you up and running.
This Rotary cutter is adapted for standard Category 1
– three-point hitch or Quick-Hitch system
mounting. It’s recommended to equip a slip clutch PTO shaft.
SECTION 1: ASSEMBLY AND SET-UP
TRACTOR REQUIREMENTS
Tractor horsepower should be within the range noted below. Tractors outside the horsepower
range must not be used. Must be using a minimum of 65 hp when operating at maximum
capability. The lower 3-Point arms must be stabilized to prevent side to side movement. Most
tractors have sway blocks or adjustable chains for this purpose.
WARNING
To avoid serious injury or death:
Lightweight tractors with rear attached implements may need weights added to the front to maintain
steering control.
Consult your tractor Operator’s Manual to determine proper weight requirements and maximum
weight limitations.