Titan Attachments 191587, Руководство оператора

Страница: 16 / 50

16
TRACTOR HOOK UP
DANGER
To avoid serious injury or death:
A crushing hazard exists while hooking-up and unhooking the implement. Keep people and animals
away while backing-up to the implement or pulling away from the implement. Do not operate
hydraulic controls while a person or animal is directly behind the power machine or near the
implement.
WARNING
To avoid serious injury or death:
Lightweight tractors with rear attached implements may need weights added to the front to maintain
steering control.
Consult your tractor Operator’s M anual to determine proper weight requirements and maximum
weight limitations.
Refer to Figure 1-13:
1. Slowly back tractor up to rotary cutter while using tractor’s 3 -Point hydraulic control
lever to align lower lift arm hitch holes with cutter hitch pins. (Item 2)
2. Always Disengage power take-off, engage tractor park brake, shut tractor engine
off, and remove switch key before dismounting from tractor.
3. Slide lower 3-point lift arms onto cutter hitch pins (Item 2). Secure hitch pins with
safety lock pins (Item1).
4. Connect hitch hole in top center 3-Point link to upper clevis hitch with top hitch pin
(Item 4) and safety lock pins (Item1).
5. Ensure that the lower hitch arms are locked to prevent excessive side movement.
6. Return to tractor and slowly raise and lower implement carefully to ensure drawbar
tires, and other equipment on the tractor do not contact cutter frame and driveline.
Move or remove drawbar as needed.
7. Manually adjust one of the two lower 3-point lift arms up or down to level the
rotary cutter from left to right. Final adjustments will be made later during “Deck
leveling & Cutting Height” on page 21.
8. The arm lift rods on your t ractor’s 3 -point lift arm should be adjusted to allow for
lateral float. Please consult your tractor’s manual for adjusting instructions.