Tion O2 Lite, Руководство пользователя, Страница: 22 / 36

22 Compact Ventilation Unit
PLEASE NOTE! Do not reset the counter without replacing filters. Operating
the device with used filters can decrease performance, increase fan noise
and cause device failure.
5.3.14 Saving settings in memory
All parameters retain the configured values upon switching to and from the standby
mode as follows:
• upon pressing the button on the control panel or remote control,
• when the timer is used,
• under automated control by MagicAir,
• at power-off using the switch on the right panel of the device,
• at power outage.
5.3.15 Device shutdown, power off
To switch the device off for a short period, press the button on the control panel
or remote control. The fan will turn off and the flap will close. If a fault occurs during
flap closure (flap remains open), a double beep will sound. In this case turn the device
on and then off again. If the problem persists, contact the service center.
PLEASE NOTE! If you plan to turn the device off for a longer period, press
first the control button on the lower panel or remote control and wait
25 s (till the flap is closed), then turn off the power switch on the right
panel and pull the power cord out of the socket. Failure to do so will lead to
incomplete closure of the flap, and air from outside will be drawn into the
room.
Blinking
segments
Figure 17. Configuration of filter replacement alert schedule