User Manual-VN1
Version C July 2020
13 of 23
13
System wiring definition
2.3
The optional VN1 T-smart system is integrated with the T-smart PBCA and MCU. All the functionality can be
achieved with proper configuration on PGVN. Please refer to the following table that describes the primary
(but not limited) system, implying the required system and the relative connections for each pin, signal spec
and warnings.
If there is a different system request not listed in the following table, please contact TiMOTION for further
discussion.
# Voltage System
Connection description
A DC
Single
Stable DC power supply
DPDT switch to control the power polarity of motor
C AC
Single
100-240VAC power source
SPDT switch to control the power polarity of motor
Optional window sealed indicator when actuator is fully retracted
D AC
Simultaneous
100-240VAC power source
SPDT switch to control the power polarity of motors at the same time
Optional window sealed indicator when all actuators are fully retracted
