User Manual-VN1
Version C July 2020
7 of 23
7
Safety Instructions
2.1.2
It is important to follow these instructions for the safety of users and operators. These instructions should be
kept in a safe place for the entire service life of the products.
Risk of crushing and entrapment! Window can close automatically!
The integrated load cut-off stops the drive during closing and opening when the drive is overloaded. The
compressive force can crush fingers in the event of carelessness.
Area of application
The drive shall only be used according to its intended use. For additional applications consult the
manufacturer or his authorized dealer.
Do not misuse the drive for other lifting operations! Do not allow children to play with this drive or its
regulating control units, including the remote control!
Always check whether the system complies with current regulations. Special attention must be paid to the
opening width, the opening area, the opening time, the opening speed of the window, the temperature range
of the drives/external devices and cables, as well as the cross section of the connecting cables as function of
the cable length and power consumption.
All devices must be permanently protected from dirt and moisture if the drive is not explicitly suitable for use
in wet areas (see technical data).
Installation
These instructions address expert and safety-conscious electricians and/or qualified personnel
knowledgeable in electrical and mechanical drive installation.
The safe operation and avoidance of injury, as well as avoidance of damaging the property, is only
guaranteed by proper installation and setup utilizing these installation instructions.
All specifications for installation must be checked independently and, if necessary, adjusted at the installation
site. The connection assignment, the electrical supply data (see machine plate) and performance limits (see
technical data) as well as the mounting and installation instructions of the drive must be strictly observed
and adhered to!
