1OPK$CUG +PUVTWEVKQP /CPWCN
4GUGV5[UVGO/GPW
%COGTC5YKVEJGT
RESET SYSTEM
1) DELETE ALL
RECORDINGS ON DISK >NO
2) DELETE THE ALARM
HISTORY NO
3) RESET THE MENU TO
THE FACTORY DEFAULT
STATE WITH... NO
LANGUAGE ENGLISH
QUIT
RESET THE ABOVE NOW
This is the “Reset System” menu, in which the OmniBase may be reset
according to requirements.
1)
DELETE ALL RECORDINGS ON DISK
Removes all recorded footage. Menus and alarm history are left but all alarm
footage is also deleted in the process so a jump to the footage from the alarm
history menu will not function.
2)
DELETE THE ALARM HISTORY
Removes all entries in the alarm history menu. Note the alarm recordings are
still available after this process, but any write-protection is removed, so that on
the next recording pass over the disk the images will be overwritten.
3)
RESET MENU TO FACTORY DEFAULT STATE WITH
LANGUAGE ENGLISH/FRENCH/AMERICAN
This reset the menu and sets up for other languages. Currently English,
French and American languages are selectable.
9#40+0)
Choosing a full reset i.e. by putting YES into all three of the selections will
reset the OmniBase to the factory shipped configuration. The menus will
return to their default states, the “Alarm History” menu will be cleared, all
menu settings will revert to factory default settings, and any recording on the
hard disk (including write-protected images) will be deleted. The password
remains unchanged.
1OPK$CUG +PUVTWEVKQP /CPWCN
Switch the view to camera 1 to 8. When playing back recorded
footage, pressing buttons 1 to 8 changes playback to that camera.
If the AUTO LED is lit, buttons 1 to 8 change the live camera
being viewed. This camera is held on the main monitor.
#761
Activate the auto switcher mode. In this mode, the monitor will
show a live view and the cameras are cycled as specified in the
“Video Switcher” menu (see page 32). Press the
#761
button
again to deactivate the auto switcher mode. If any of the buttons
numbered
are pressed while in auto switcher mode, the
camera switching is stopped, and the selected camera view is held
on screen. Camera switching in this case is still maintained on the
switcher output BNC socket.
&'.'6'
When using menus this button is used to delete numbers.
Control of the auto switcher does not affect any recording in
progress.
